«

[Eagle of Fire]

Did you try copying everything from 1 and 2 to a new folder? Maybe it will work that way...

[Tracker]

Shit seems to went wrong. Obviously, the on-site game is something else than what I played. I know that there are numerous versions of the game, and they've been changed a little from time-to-time. The only answer can be that either I was playing with the original DOS release, or more likely I was playing the Wizardry Archives release (which was a nineties port/remake of the trilogy). Maybe I could provide you my archives, movezig5. But that might mean you would need to start over. Honestly, I didn't know about this. The situation makes me assume the other games were provided by someone else too, there just wasn't anyone willing to write a review them. But the fact that the on-site game is different from what I played scares me. Will then everyone bump into a wall of bugs when trying to transfer their characters? Dammit.

[movezig5]

Originally Posted by Tracker

Shit seems to went wrong. Obviously, the on-site game is something else than what I played. I know that there are numerous versions of the game, and they've been changed a little from time-to-time. The only answer can be that either I was playing with the original DOS release, or more likely I was playing the Wizardry Archives release (which was a nineties port/remake of the trilogy). Maybe I could provide you my archives, movezig5. But that might mean you would need to start over. Honestly, I didn't know about this. The situation makes me assume the other games were provided by someone else too, there just wasn't anyone willing to write a review them. But the fact that the on-site game is different from what I played scares me. Will then everyone bump into a wall of bugs when trying to transfer their characters? Dammit.

I see. I haven't started playing yet (because of this bug), but I think I'll see if I can't get the Ultimate Wizardry Archives. That would probably be easier than trying to get this to work.

Thanks for all your help!

EDIT: Wizardry Ultimate Archives works flawlessly. Time to finally start my game!

[Tracker]

Originally Posted by movezig5

I see. I haven't started playing yet (because of this bug), but I think I'll see if I can't get the Ultimate Wizardry Archives. That would probably be easier than trying to get this to work.

Thanks for all your help!

EDIT: Wizardry Ultimate Archives works flawlessly. Time to finally start my game!

We're glad to help you. If you have any more questions, feel free to ask. Have fun playing Wizardry

Finally figured out how to move the characters.

3 Folders in my root C folder: Wiz1 Wiz2 and WizCopy
Folder Wiz1 has the original Wiz1 .dsk file in it, but it is renamed to Wiz2.dsk
Folder Wiz2 has all the files for Wizardry 2
FolderWizCopy has a copy of the Wizardry 2 wiz2.dsk in it

Start game normally
Goto Edge of Town
Goto Utilities
Goto Move Characters

To enter your Source Disk (Wiz1.dsk)
Open the Command Prompt
Navigate to the folder Wiz 1
At the prompt type copy wiz2.dsk c:\wiz2
Press Enter
Press Enter on the Wizardry 2 game - it will copy the characters

It will then prompt you to enter your source disk.
Open the Command Prompt
Navigate to the folder WizCopy
At the prompt type copy wiz2.dsk c:\wiz2
Press Enter
Press Enter on the Wizardry 2 game - it will copy the characters

It will then prompt you to enter your source disk.
Press Enter - IT will give you an error about not really being the source disk.
Click the X and close to program.
Restart the program and shazam the characters are there.

Have fun!!!

Originally Posted by Lokii

Finally figured out how to move the characters.

3 Folders in my root C folder: Wiz1 Wiz2 and WizCopy
Folder Wiz1 has the original Wiz1 .dsk file in it, but it is renamed to Wiz2.dsk
Folder Wiz2 has all the files for Wizardry 2
FolderWizCopy has a copy of the Wizardry 2 wiz2.dsk in it

Start game normally
Goto Edge of Town
Goto Utilities
Goto Move Characters

To enter your Source Disk (Wiz1.dsk)
Open the Command Prompt
Navigate to the folder Wiz 1
At the prompt type copy wiz2.dsk c:\wiz2
Press Enter
Press Enter on the Wizardry 2 game - it will copy the characters

It will then prompt you to enter your source disk.
Open the Command Prompt
Navigate to the folder WizCopy
At the prompt type copy wiz2.dsk c:\wiz2
Press Enter
Press Enter on the Wizardry 2 game - it will copy the characters

It will then prompt you to enter your source disk.
Press Enter - IT will give you an error about not really being the source disk.
Click the X and close to program.
Restart the program and shazam the characters are there.

Have fun!!!

I am way to inexperienced with computers to follow these instructions. I tried several times, without success. Any chance anyone can upload Wizardry II with characters already loaded? At this point, I don't even care about using my characters from Wizardry I, I just want to to play the second scenario.

hey everyone.

i had exactly the problem the thread opener had. and i was able to fix it, thanks to lokii's post.

however, i modified the method he described slightly.

1st, i had to start up wizardry 1 (I'm using DosBox, btw). there, i went to the edge of town, utilities, move and moved my party. it doesn't make a lot of sense (or does it?), but it didn't work before i did this, so i list it as step 1.

2nd, i made a backup of my wiz1.dsk, copied it to a new folder and renamed it to wiz2.dsk.

3rd, i made a backup of the original (blank, if you will) wiz2.dsk that came with wizardry 2.

4th, i started up wizardry 2, went to edge, utilities, move, until the game asked me to put in the disk i wanted to move the characters from.

5th, i copied the backed-up wiz1.dsk (renamed to wiz2.dsk) into the wizardry 2 folder, replacing the file of the same name present there.

6th, back in the game, i hit enter. finally i saw my party from wizardry 1, marked them for copy, hit enter again.

7th, the game asked me to insert the disk to copy the characters to, so i copied the backed-up original wiz2.dsk to the wizardry 2 folder, once again replacing the existing file.

8th, in the game, hit enter and i saw my characters being imported.

9th, ignoring the prompt to re-insert the original disk, i simply closed the game window and restarted the game normally. my characters were finally available to play wizardry 2!

i know, it sounds really complicated, and it's quite possible that there's a much easier way to do this - but it worked for me.
hopefully this post will help others in the future, too.

long nights and pleasant nights to you,
atantuo

Originally Posted by Atantuo

hey everyone.

i had exactly the problem the thread opener had. and i was able to fix it, thanks to lokii's post.

however, i modified the method he described slightly.

1st, i had to start up wizardry 1 (I'm using DosBox, btw). there, i went to the edge of town, utilities, move and moved my party. it doesn't make a lot of sense (or does it?), but it didn't work before i did this, so i list it as step 1.

2nd, i made a backup of my wiz1.dsk, copied it to a new folder and renamed it to wiz2.dsk.

3rd, i made a backup of the original (blank, if you will) wiz2.dsk that came with wizardry 2.

4th, i started up wizardry 2, went to edge, utilities, move, until the game asked me to put in the disk i wanted to move the characters from.

5th, i copied the backed-up wiz1.dsk (renamed to wiz2.dsk) into the wizardry 2 folder, replacing the file of the same name present there.

6th, back in the game, i hit enter. finally i saw my party from wizardry 1, marked them for copy, hit enter again.

7th, the game asked me to insert the disk to copy the characters to, so i copied the backed-up original wiz2.dsk to the wizardry 2 folder, once again replacing the existing file.

8th, in the game, hit enter and i saw my characters being imported.

9th, ignoring the prompt to re-insert the original disk, i simply closed the game window and restarted the game normally. my characters were finally available to play wizardry 2!

i know, it sounds really complicated, and it's quite possible that there's a much easier way to do this - but it worked for me.
hopefully this post will help others in the future, too.

long nights and pleasant nights to you,
atantuo

Thanks, that worked perfectly. Like you said, I have no idea why it works, but it worked! So thanks again!

[wjcasperson]

I have the ultimate wizardry archives, and here is my procedure:
(make sure the save1.dsk or save2.dsk is in the same directory as the wiz3)
E)dge of town
U)tilities
M)ove Characters
select from which Wizardry...in my case 1) Proving Grounds and 2) Knight of Diamonds. I picked 1
select your character(s) and hit enter
go back to the E)dge of town
T)raining ground
I)nspect character - your new characters should be visible
select your new character
L)egate
enter to leave that character. select another and repeat if needed
enter to leave training grounds
new character should now be visible in Gilgamesh's Tavern

Note: be careful that you don't have too many characters in Wiz3 before you start this. Also, for the transfer process, use your dosbox settings to slow down wiz3 as much as possible, so you can read any error messages that come up. This is available in the CPU section of D-Fend Reloaded profile for the game. I had about 200 cycles to read the messages. That's how I found out I had a full roster, and it wouldn't transfer.