Go Back   Forums > Abandonia.com > Troubleshooting > Troubleshooting Archive
Memberlist Forum Rules Search Today's Posts Mark Forums Read
Search Forums:
Click here to use Advanced Search

Closed Thread
 
Thread Tools Display Modes
Old 19-01-2005, 12:26 PM   #1
Eagle of Fire
Friendly Fire
 
Eagle of Fire's Avatar

 
Join Date: Sep 2004
Location: Valleyfield, Canada
Posts: 4,892
Red face

First thing first.

Before the Windows era, there was DOS. DOS is the first PC OS (operating system) widely available (if not the first at all) and thus, as you can immagine, is quite old. Also known as MS-DOS (MS for Microsoft), this OS sported no graphics and was operated with small word commands no longer than 8 characters and 3 extra caracters for their extention (.exe is an example).

Most of Abadonnia games are old DOS games, which mean that you will require an MS-DOS environement to be able to make them run. This is where the first difficulty will come for you; you need MS-DOS compatibility. Newer OS like Windows XP or 2000 are utterly useless in that aspect, while Windows 98/95 offer the most compatibility on the matter but are still uneasy to work with.

The Workaround

A nice program been created to emulate a DOS environement under the newer Windows OS, especially Windows XP. Named DOSBox, this program allows you to create a true DOS environement within a window. It will emulate Soundblaster hardware even if you don't actually have a Soundblaster sound card installed in your computer and will allow you to change the emulation speed so you will be able to correct the high speed problem you encounter with modern computers when playing old games.
[Note: need more info, this is far from being complete]

What is more often than not the real problem with most OS incompatibilities tough is the sound. Old games used old sound cards back in the days, and those DOS sound protocols are not supported by the newer OS. Another neat program will allow you to only emulate sound support on your system, and is called VDMSound. While it won't be able to correct those speed problems, it is a great alternative to DOSBox if your machine is not fast enough to make it run decently. VDMSound is built in DOSBox tough, so having DOSBox more often than not render this program obsolete.
[I feel this is incomplete also]

You can find a link of both programs on Abadonnia site under the Services => Programs section.

For Windows 98/95, most of the DOS programs should work with a little tweaking. The most important aspect of the tweaking, if you wish to play a lot of old games under this OS, is to edit your DOS configuration files so they load DOS drivers at startup. Here is a nice walkthru helpfile on the matter, made by Mr Creosote:

Quote:
MS-DOS

This page explains the basic concepts of system and memory configuration in MS-DOS. It's all valid for Windows 9x as well. I'm not sure about Windows NT and its offsprings.
The examples assume that c: is your hard drive and windows is the only operating system. If that is not the case, you just have to swap this part.

WARNING: BEFORE YOU EDIT YOUR SYSTEM FILES COPY THEM. CHANGE THEM AT YOUR OWN RISK!

1. AND MOST IMPORTANT HINT: PLAY DOS-GAMES IN DOS
Most people use Windows 95/98. But you really should configure the so-called "DOS-Mode" in order to play the good old games. Even if a game does not crash by chance (there should be examples), there will still be problems, at least with sound.


2. THE CONFIG.SYS
Nobody can write a general Config.sys because drivers for the specific computer are loaded here. But there are a few general rules that everybody should know. In general: load big drivers first.

2.1 EXTENDED/EXPANDED MEMORY
This is all the RAM over the 1MB border. DOS can not access it directly. That is why different methods were developed to use this memory.

2.1.1 EMS
EMS means "Expanded Memory". Particularly older games use this kind of memory. It can be emulated by different memory managers. For the standard DOS one you have to write:
DEVICEHIGH=C:\WINDOWS\EMM386.EXE RAM
Another Option is to fix the number of bytes used as EMS. If you need only 1MB for example, just add this amount in kilobytes:
DEVICEHIGH=C:\WINDOWS\EMM386.EXE RAM 1024

2.1.2 XMS
XMS stands for "Extended Memory". It is "newer" than EMS. It can be activated by a memory manager like HIMEM.SYS
DEVICE=C:\WINDOWS\HIMEM.SYS
If you want to load EMM386, too, add the following line:
DEVICEHIGH=C:\WINDOWS\EMM386.EXE NOEMS

2.1.3 DOS-EXTENDERS
DOS-Extenders are the most "current" way to gain access to RAM. The most common one is DOS4GW. If a game uses one, there should not be any problems in general.

2.2 BASE MEMORY
Also called "DOS-Memory", meaning the first 640 KB of the RAM. DOS runs in this part. Because of this division it can happen that although you have 128 MB on the whole, a game reports too less memory. The problem is that all memory resident drivers are also put here. That is why no one has ever the whole 640 KB ready for use.

2.2.1 LOAD DRIVERS HIGH
You should try to load as many drivers as possible in another memory area to have as much of it free as possible. The part between 640 KB and 1 MB is more or less unused. By
DOS=HIGH,UMB
you give DOS access to two subdivisions of this. In some cases you should drop UMB but HIGH is always recommendable. After this line you should change all commands beginning with DEVICE to DEVICEHIGH.

2.2.2 FILES, BUFFERS AND LASTDRIVE
Files and buffers are necessary in a different amount for each program. You can reduce both values to get more free memory.
FILES=40
BUFFERS=5
e.g. are more space saving commands. You can experiment with these values witout any danger. Even more simple is the usage of LASTDRIVE. Almost anybody knows what his last drive is.
LASTDRIVE=E
If you add another drive later, you of course have to change it.

2.3 AN EXAMPLE
This is an example for a Config.sys without much finess. PLEASE DO NOT COPY.
DEVICE=C:\WINDOWS\HIMEM.SYS
LASTDRIVE=E
FILES=80
BUFFERS=10
DOS=HIGH,UMB
DEVICEHIGH=EMM386.EXE RAM
DEVICEHIGH=C:\SB64\DRV\CTSB16.SYS /UNIT=0 /WIN95 /BLASTER=A:220 I:5 D:1 H:5 (my soundcard)
DEVICEHIGH=C:\SB64\DRV\CTMMSYS.SYS (sound again)
DEVICEHIGH=C:\WINDOWS\COMMAND\VIDE-CDD.SYS /D:IBMCD001 (CD-ROM)
DEVICEHIGH=C:\WINDOWS\COMMAND\DISPLAY.SYS CON=(EGA,,1) (graphics)
COUNTRY=049,850,C:\WINDOWS\COMMAND\COUNTRY.SYS (country)

3. THE AUTOEXEC.BAT
You add commands to the Autoexec.bat which you could also use on the DOS-Prompt. Similar rules as for the Config.sys apply.

3.1 LOAD HIGH
In front of every command (bat, exe or com) there should be "lh"
lh driver.exe

3.2 IMPORTANT LINES
Some commands are almost indispendable, others just make it easier.
SET BLASTER=A220 I5 D1
sets the sound card to adress 220, interrupt (IRQ) 5 and DMA 1 (modify for your configuration).
SET PATH=C:\DOS;C:\WINDOWS;C:\WINDOWS\COMMAND;C:\
Every command that is not being found in the current directory will be searched in these directories.
LH DOSKEY
aktivates a driver that saves typing everything again. Just use cursor up.
LH C:\MOUSE\MOUSE.COM
loads a mouse driver which is necessary for most games (example; other directory/name possible).

4. DO YOU NEED ALL DRIVERS?
Most old games do not need CD-ROM for example.That means you can deactivate this driver in the Config.sys and MSCDEX in the Autoexec.bat. A soundcard is often not necessary, too. Drivers for networks are futile. These changes have to be cancelled later, of course. Therefore it is not clever to delete the whole lines but to mark them as a remark by REM instead.
REM DEVICEHIGH=...
REM LH ...

5. OVERFLOW/DIVIDE ERROR
These error messages indicate that your computer is too fast for the program. Solution: slow down programs (Applications) or disabling cache in BIOS. That is done in different ways depending on your BIOS.

6. ADVANCED OPTIONS

6.1 BOOTDISK
If you often need different configurations, there is of course the possibility of a bootdisk. You have to set the booting order in BIOS to A,C. Then you format a disk by
format a: /s
The necessary files will be transfered automatically. Then modify Config.sys and Autoexec.bat on the disk and reboot your computer from it.

6.2 CHOOSE YOUR OPTION
A bit more difficult but less costly on the long term is this possibility. A menu will be shown when booting, so that you can choose your option. That is possible in MS-DOS 6.0 or higher.

6.2.1 CONFIG.SYS
At the beginning stands a list with the menu options:
[MENU]
MENUITEM=name, description
MENUITEM=name2, description2
...
MENUDEFAULT=name, time
"name" is what is used in the Config.sys. "description" will be displayed later. "MENUDEFAULT" is the option which will be chosen automatically, if "time" in seconds expires.
Then a part with general commands which will always be used follows:
[COMMON]
DEVICE=C:\WINDOWS\HIMEM.SYS
LASTDRIVE=E
...
Then the options as defined above:
[name]
...
[name2]
...

6.2.2 AUTOEXEC.BAT
Programming the Autoexec.bat is a bit more primitive. First there are general commands similar to [COMMON] in the Config.sys.
Following this is the command
GOTO %CONFIG%
This is to get the names of the options from the Config.sys These options follow, then another part with general commands (EXIT).
:name
...
:name2
...
:EXIT
...

Reference: http://www.goodolddays.net/index.php?args=...0;en;0;0;faq;1;
Credits are due to Mr Creosote for this excellent MS-DOS helpfile.

[More to come, feel free to comment. Taking a little break after all this typing.]
__________________
I'm on a hot streak... Literally.
Proud member of The Abandoned since 2005.
Eagle of Fire is offline                         Send a private message to Eagle of Fire
Closed Thread


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mmo Gaming bohor Gaming Zone 36 04-03-2011 11:51 PM
Can't Configure Fury Of The Furies? Lili Hardin Troubleshooting 38 24-08-2006 10:49 AM
How Do I Configure A Cd-drive For Dos? Jarl_Frankr Troubleshooting 2 29-10-2005 12:04 AM
Can't Configure Star Wars: Dark Forces BlackMageJawa Troubleshooting 2 29-09-2004 07:29 AM
Gaming...... Anonymous Gaming Zone 17 25-09-2004 04:23 AM

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump
 


The current time is 12:39 AM (GMT)

 
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.