«

[Grinder]

Well, the problem is, I'll have to stick with 0.5 for 2 more years. And the SPAS is just wishful thinking, the silencer comes first.
I remember seeing the Phantom AUG on GnG for like 1400$. Seems like a pretty good bargain.

Someday, you'll have to explain how changing a barrel works.

[Titan]

On AUG it's the easiest thing in the world.. Just turn the hopup-house 1/4 anti-clockwise and it clicks loose, and the barrel is attacked to the hopup-house, so just pull it out.

[Grinder]

And how is it on the other guns?

[Titan]

More or like the same, but requires more disassembly to access the barrel/hupup :/

[Grinder]

Good news - I have drawn another soul into the world of airsoft. A friend of mine just ordered some basic gear. TM spring gun plus mags and ammo. Nothing big, but it'll give him a good taste.

[Titan]

All i need to say...
http://www.airsoftevents.se/gallery/main.p...g2_itemId=48348

That guy was pwned... done from 2 m.. caused some collateral when i took out an teammate in the blast, but we made the objective none the less... Counted 53 visible hits on his arm alone. No picture of the torso

BANZAI!

[Grinder]

That guy was pwned indeed. How can you sleep at night?
Seriously though, that's gotta hurt. Isn't it like 165 BBs at like 1 Joule? That's like just too much for me

[Titan]

L O L...

Got an email today as a reply to a question.
It's from a company called MadBull. They've manufactured the 'nades i'm using, and in the last mail, i attached the link to the gallery... I didn't expect much of a responce, as they appear to be a serious company and they guy i've had the exchange with had been keeping a more or less "official" tone.... up to now that is;

And i qoute:

WOW....
Martin,
You are the MAN!!!
COOL!

I gonna sent you some oring withe order.
I am sorry but I have to say the oring have to be changed frequently
if you refill with "liquid CO2."
I will suggest you to use the XC-02 adjustable CO2 charger. About 400
psi, you can reach the best performance!

Thanks again for your supporting and ....your photos are very cool!
: )

Best Regards,
Simon
Mad Bull Airsoft
Fax: 1.626.609.0329
Address: 2319 Chico Avenue Suite #2 , South El Monte, CA 91733

----- Original Message ----- From: "Martin" <nope@not.on.the.net>
To: "MAD BULL Airsoft" <simon>
Sent: 2006?12?4? 2:17 PM
Subject: Re: From Mad Bull Airsoft


Hi Simon!
Haha.. Ok, well i can understand that.
Now.. i have to ask if you can help me with a thing?
I'm in love with the XM 108HP's, BUT.. as with the XM 204HP i have
a problem. The valves last everything from 1-10 shots, and then
they are finished.
It appears as in most of the cases (about 5 of the 6 i have ruined) the
tiiiiiny o-ring around the pin in the refil-valve has gone with the wind..
Literaly speaking. I've also lost about 40 of the 60 ballbearings in total
as they have gone the same way as the BB's, but i've found replacement
for them allready.

Question 1: Would it be possible to get the tiny o-rings only? I have tried my
local hardware-stores allready, but they don't have that small.

Question 2: What is the greese that holds the ballbearings? I need to replace
that on 12 of my 15 shells by now, as it gets "removed" over time and
the ballbearings will get expelled even easier.

All this is ofcource my own fault as i'm "misshandeling" the shells with
liquid CO2 @ 800 PSI, and as faar as i've been able to read, they where only
designed for 400 PSI.
If there is ANYTHING i can help YOU with, as in terms of how they preform, how
they hold up or ideas, just ask. I'm using a Paintball tube with your
XM Charger (first edition) adapter, 6 x XM 204HP, 9 x XM 108HP (more
to come)

If you are intrested in how they are used, here is the Temple of MadBull:
http://www.airsoftevents.se/gallery/main.p...g2_itemId=48348

BEST regards; Martin[/b]

What can you say? Even THEY love it
I pwn!

btw, it's either 108 x 6 or 204 x 1 at the time in the GL.. they are both doing +100 m/s. Around 380 km/h
Matrix THAT!

[Grinder]

You do indeed pwn quite a bit. But I don't understand what that was about

[Danny252]

LOL, I just randomly browse, and I find yet another reason not to piss off titan... hah!